Coating Maintenance Tech

Job Summary:

The purpose of the Coating Maintenance Tech is to be responsible for making first quality carpet and notifying supervisor of any quality problem.

Essential Duties & Responsibilities:

• Work safely with complete adherence to all safety procedures.
• Be a committed employee who adds value, endeavoring to make EF a high performance workplace.
• Must be able to identify problems with the coater and repair back to proper working order.
• Responsible for making first quality carpet and notifying supervisor of any quality problem.

Performance Expectations (if applicable):

• Lifting is required of machine parts and tools weighing 1 to 40 lbs 10 to 30 times per shift.
• Standing is required approximately 6 hours per shift.
• Reaching is required for parts and tools every 10 to 15 minutes though out shift.
• Stooping is required once an hour for 10 minute intervals.
• Bending is required to work on machines 3 to 5 minutes.
• Must be able to operate lift truck.
• Must be able to use wrenches continuously during shift.
• Scissors and hand trucks once a shift.
• Power tools 3 to 4 times weekly.
• Must be able to climb underneath machines or on top of machines if needed.
• Lifting is required of metal and wood weighing 1 to 70 lbs 10 to 30 times per shift.
• Clean latex filter baskets every hour.

Experience/Education Requirements:

• High school diploma or equivalent preferred.
• Must be able to read and write and do basic addition, subtraction, division, and multiplication.
• Computer knowledge or data entry skills are a necessary part of the job.
• Welding and fabricating experience.
• Carpentry skills.
• Knowledge of:
  
  
  
  • Pumps and mixers
  • Sprockets
  • Sewing machine
  • Rollers and bearings
  • Motors
  • Gear boxes and chains
  • Hydraulic pistons and lines
  • Piping
  • Air lines
  
  
  
  

Other Requirements:

• LTO certified
• Self starter.
• Responsible for quality and safety of his/her own output.
• Report to management any quality, safety, or potential problems encountered while performing the job.
• Safety equipment must be worn as required.
• Must be trained in Lockout / Tagout.
• Perform any other duties as assigned.
• All accidents must be reported immediately.
• Overtime is required on occasion